31万平方米!CIMT2025将首次同时使用首都国际会展中心 和中国国际展览中心（顺义馆）

第十九届中国国际机床展览会（CIMT2025）将于2025年4月21-26日在北京举办。中国国际机床展览会（CIMT）由中国机床工具工业协会主办并与中国国际展览中心集团有限公司共同承办，是中国知名度最高、规模最大、影响力最广的机床工具专业展览会；是被国际业界公认的与欧洲EMO、美国IMTS、日本JIMTOF齐名，不可错过的四大国际机床名展之一。CIMT2025展会自今年6月份招展工作启动以来，得到了境内外展团、展商的积极响应，报名参展踊跃。截至11月25日，共有来自28个国家和地区的2800余家企业申报参展，申报净面积近19万平方米，其中境外展区有800余家企业申报参展，申报净面积超过5万平方米；境内展区有2000余家企业申报参展，申报净面积超过13万平方米。

CIMT2025展会原计划只使用首都国际会展中心，展馆总面积21万平方米，可使用展位净面积10万多平方米，只能满足境内外展商面积需求的50%左右，面积缺口很大。为解决面积严重不足的问题，主办方经过多方协调和沟通，最终决定CIMT2025展会将首次同时使用首都国际会展中心和中国国际展览中心（顺义馆）。两个展馆同时使用，CIMT2025展会的总规模将超过31万平方米，预计可使用展位净面积约16万平方米，展商的面积满足率可达到80%左右，CIMT展会长期以来面积严重不足的困境将得到缓解，广大行业企业的参展需求将得到较好的满足。

首都国际会展中心和中国国际展览中心（顺义馆）南北毗邻。CIMT2025展会期间，两个展馆将贯通连接，联动运营。当然，两个展馆同时使用也将使交通、进撤馆操作、水电气供应等面临较大压力，对展会主承办方、展馆和各服务商来说都将是极大的挑战。在此，也希望得到境内外展团、展商的理解和积极配合。主办方将联合展馆、各合作单位，通力合作，努力做好展会的各项组织筹备和服务工作，为大家呈现一场展现当今全球机床工具业界最前沿的新产品、新技术、新工艺的行业盛会！

来源：中国机床工具工业协会

310,000 Square Meters！ CIMT2025 will, for the First Time,

Simultaneously Utilize Both Capital International Exhibition Center of China (CIECC)

and the China International Exhibition Center (Shunyi Hall)

The 19th China International Machine Tool Show (CIMT2025) will be held from April 21 to 26, 2025, in Beijing. CIMT is sponsored by China Machine Tool & Tool Builders’ Association (CMTBA) and co-organized with China International Exhibition Center Group Limited (CIEC), it is the most renowned, largest, and the most influential professional machine tool exhibition in China. It is internationally recognized as one of the four major global machine tool exhibitions, alongside EMO in Europe, IMTS in the United States, and JIMTOF in Japan. Since the exhibition’s recruitment process began in June this year, it has received enthusiastic responses from domestic and overseas pavilions and exhibitors. As of November 25th, over 2,800 companies from 28 countries and regions have applied to participate, with a total requested net exhibition area of nearly 190,000 square meters. This includes over 800 overseas companies, requesting more than 50,000 square meters, and more than 2,000 domestic companies, requesting over 130,000 square meters.

CIMT2025 was originally planned to use only Capital International Exhibition Center of China (CIECC), which offers a total exhibition area of 210,000 square meters and a net usable exhibition area of just over 100,000 square meters. However, this could only satisfy about 50% of the area demand from domestic and overseas exhibitors, leaving a significant shortage. To address this issue, the sponsor has coordinated extensively and ultimately decided that CIMT2025 will, for the first time, simultaneously utilize both Capital International Exhibition Center of China (CIECC) and the China International Exhibition Center (Shunyi Hall). With the two venues combined, CIMT2025 will have a total scale exceeding 310,000 square meters, with an estimated net usable exhibition area of approximately 160,000 square meters. This will meet about 80% of exhibitors' area demands, significantly alleviating the long-standing issue of insufficient exhibition space and better accommodating the participation needs of the enterprises in this field.

Capital International Exhibition Center of China (CIECC) and the China International Exhibition Center (Shunyi Hall) are located adjacent to each other, forming a north-south connection. During CIMT2025, the two venues will be seamlessly linked and jointly operated. However, the simultaneous use of both venues will impose considerable pressure on traffic, move-in and move-out operations, and utilities such as water, electricity, and gas. These challenges will require significant efforts from the sponsor and organizers, venue operators, and service providers. We sincerely hope for the understanding and active cooperation of all domestic and overseas pavilions and exhibitors. The sponsor will work closely with the venues and all partnering units to ensure thorough preparations and services, aiming to present an industry event showcasing the latest cutting-edge products, technologies, and processes in the global machine tool industry.

Source: CMTBA

（中国机床工具工业协会cmtba）

声明：本网站所收集的部分公开资料来源于互联网，转载的目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。本站部分作品是由网友自主投稿和发布、编辑整理上传，对此类作品本站仅提供交流平台，不为其版权负责。如果您发现网站上所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并按国家标准支付稿酬或立即删除内容，以保证您的权益！联系电话：010-58612588 或 Email:editor@mmsonline.com.cn。